• Ships across CanadaShipping 5 Days a Week
  • Made in CanadaManufactured by StoneSealer Canada
  • Prices in CADNo currency surprises
  • Expert supportAsk our team

Frequently asked questions

Is AquaBlocka VOC free?
Yes. AquaBlocka is a waterborne impregnating emulsion with 0 VOC.
What sizes does AquaBlocka come in?
1 gallon and 5 gallon pails.
How much AquaBlocka do I need?
Coverage depends on how porous the surface is. Do a test area first, or email sales@stonesealer.ca with your surface and square footage and we will help you estimate.
Can AquaBlocka be used on wood?
Yes, including cedar shakes and siding after cleaning.
Will it change the colour?
It is designed for a natural finish; test first because some surfaces may vary.
How dry should the surface be?
Below 25% on a masonry moisture meter.
What if AquaBlocka is out of stock?
Trident Break Wall is the recommended direct replacement.

Bundle Together and SAVE

Total price$109.00

AquaBlocka is a waterborne impregnating emulsion sealer with 0 VOC, made and packaged in Canada by StoneSealer for stone, pavers, concrete and wood. It comes in 1 gallon and 5 gallon pails. It forms an invisible barrier that repels water and resists organics, keeps a natural finish, and applies by roller, brush or airless sprayer. It is formulated for Canadian weather, from freeze-thaw winters to wet springs.

Key benefits of AquaBlocka

  • 0 VOC waterborne emulsion; safe around family, pets and plants
  • Invisible, natural finish
  • Repels water and resists organic growth
  • Roller, brush or airless sprayer application
  • Touch dry within hours
  • Made and packaged in Canada

AquaBlocka specifications

Specification Detail
Type Waterborne impregnating emulsion (penetrating water repellent)
Base Water (waterborne emulsion)
VOC 0 VOC
Finish Natural, invisible
Recoat 30-minute dwell between coats
Cure Keep traffic and water off 24-48 hours
Surfaces Stone, pavers, concrete, wood, cedar shakes
Sizes 1 Gallon, 5 Gallon pails

Who it is for

  • Driveways, patios and walkways
  • Cedar shake roofs and siding after OxyShock cleaning
  • Interior floors and walls where low odour matters

How to use AquaBlocka

  1. Remove organics, then wash with EffBOMB at 10:1 as prep.
  2. Let all areas dry fully; test below 25% with a masonry moisture meter.
  3. Test a small area for colour change and application rate.
  4. Apply 2 coats by airless sprayer, brush or microfibre roller at the rate found in your test area, with a 30-minute dwell between coats.
  5. Remove excess with clean dry terry cloths; do not allow puddling.
  6. Keep traffic and water off for 24-48 hours.
  7. Test water rejection; apply a third coat if needed.

Using AquaBlocka in the Canadian climate

AquaBlocka is made in Canada for Canadian climates and has been tested in various Canadian conditions. Note: during supply interruptions, Trident Break Wall is our recommended direct replacement.

AquaBlocka compared

Product Type Finish Joint stabilizing Coverage (per gal, manufacturer)
CAT 5 2-part urethane, water based, film forming Wet look, high gloss Yes (strongest) 80-120 sq ft with joints; 200-300 sealing only (mixed)
CAT 4 2-part urethane, water based, film forming Enhanced, gloss Yes 80-120 sq ft with joints; 200-300 sealing only (mixed)
Cyclone Water based, film forming Matte, natural Yes 80-120 sq ft with joints; 150-250 sealing only
Break Wall Silane/siloxane, penetrating Invisible No 75-200 sq ft pavers; 100-200 concrete
AquaBlocka Waterborne impregnating emulsion, 0 VOC, penetrating Natural No Ask us for coverage on your surface
SP Paver Enhancing Penetrating Colour enhanced, no sheen No See label

AquaBlocka FAQ

Is AquaBlocka VOC free?

Yes. AquaBlocka is a waterborne impregnating emulsion with 0 VOC.

What sizes does AquaBlocka come in?

1 gallon and 5 gallon pails.

How much AquaBlocka do I need?

Coverage depends on how porous the surface is. Do a test area first, or email sales@stonesealer.ca with your surface and square footage and we will help you estimate.

Can AquaBlocka be used on wood?

Yes, including cedar shakes and siding after cleaning.

Will it change the colour?

It is designed for a natural finish; test first because some surfaces may vary.

How dry should the surface be?

Below 25% on a masonry moisture meter.

What if AquaBlocka is out of stock?

Trident Break Wall is the recommended direct replacement.

Use with

StoneSealer Canada ships across Canada from British Columbia, priced in CAD. Contractor and volume pricing is available to account holders: email sales@stonesealer.ca.

Wood, Granite, Marble, Sandstone, Fiberboard, Grout, Mortar, Limestone, Hardboard, Stucco, Brick, Cement, Concrete, Stone, and Concrete Roof Tiles